Whether you want to replace an existing diving board or install a new one, the installation process is fast and convenient. The only tricky part is determining the appropriate location of the diving board and assessing if there is sufficient space for it. It would be best to hire professional pool contractors for the job.
Moreover, it is also essential to keep safety in mind during the installation process. If you are looking for your diving board’s safe installation tips, you’re at the right place. Read on to find out!
Tips for Your Diving Board’s Safe Installation
The local authorities are typically responsible for determining the safety requirements for installing diving boards. So, you should get in touch with them to learn the requirements in your area before opting to install one. Also, you should request a permit and confirm that domestic diving boards are not prohibited in your area.
Before you make a significant financial investment in a diving board, it is essential to research construction rules and seek the assistance of a pool contractor.
Once you have obtained the necessary permits to install a diving board, the next step is the diving board’s safe installation. Installing the board can be tricky, and you must follow all safety guidelines advised by manufacturers and authorities to avoid serious injuries or accidents.
These include minimum distance and depth specifications that you must strictly follow. There is a wide selection of diving boards on the market, so you can choose one that best meets your requirements.
After making a purchase, read the board’s installation instructions carefully. Set the base of the diving board in the center of your deck. Make sure this is the side of your pool that is deeper. Then ensure all minimum distance criteria are met before choosing the location. Use a chisel to remove tiles from your deck close to where you intend to install the board.
Then pour fresh, solid concrete with a 3500 PSI minimum compressive strength. This point has to be as strong as it can be as it has to bear most of the stress and weight when the board is being used.
Next, attach a 606/608 bolt jig to the board while mounting bolts. The most common colors for bolt caps are red and yellow. The location on the board closest to the pool is where the standard “RED” pointed bolts are positioned. Ensure the jig is correctly placed before pouring the concrete because it may have shifted during shipment.
The cement should be approximately 8 inches thick. As you pour the concrete, the bolt should be visible by 1.5 inches. Follow the manufacturer’s directions for concrete curing. Remove any additional concrete when it has cured, then use a chisel to level the surface to ensure the base is level with the surface. You can then remove the bold caps.
Once the diving board has been installed and secured, compare the board’s level or slope to the deck. There shouldn’t be a height difference of more than 6 inches between the end of the deck and the board’s tip.
Final Word
If you want to get a unique pool constructed in your home, Perfect Pools is here to help. We have a team of professional swimming pool designers with years of experience building swimming pools using the latest cutting-edge technology. You can also browse through our gallery to look for inspiration.
Additionally, we offer financing options for homeowners on a budget. Contact us today for more information regarding our services or get a free consultation.
